Minikrea Bunting Suit / Bunting Bag
Posted: Nov 24 2017
Step 1: Trace the pattern
Step 2: Cut the fabric, be sure to fold the fabric along the grain line.
Cut x2 Front
Cut x1 Back
Cut x2 hood
Out of each lining and outer fabric
Cut x2 Sleeve Cuff
Cut x2 Leg Cuff
** I serged outer hood/inner hood together, outer back/inner back together etc. **
Step 3: Serge or zigzag the raw edges of all the pieces. Sew the sleeves/shoulder seams, right sides together - remember to pin! Sew the sleeve/side seams right sides together.
Step 4: Sew the hood pieces together, right sides together. Sew the hood to the neckline, right sides together. Don't forget to pin! Sew over the seam of the hood to reinforce.
Step 5: Sew each cuff seam, and fold in half. Pin/clip the cuffs to the outer part of the sleeve (right side) and sew the perimeter. Step 6: Snap time! (Or tie!)
I chose to have 6 snaps in the centre to fasten the garment.
Find the middle, and place snaps on 2 inches to the left of the centre and 2 inches to the right of the centre. 1.5 inches down from each other.