DIY: Simple Washcloth
Bias tape made out of:
--any woven will do
HOW to make bias tape --> https://www.youtube.com/watch?v=9TxwfCWGUkY
Step 1: I made two sizes of washcloths
Cut 12x12 square out of the french terry
Cut two 12x12 squares out of muslin
Roughly 50in. of Bias tape required for 12x12
...if wanting 6x6 washcloths cut out in the smaller size..
Step 2: Place the french terry on top of the two layers of muslin, serge and round corners.
Step 3: Halfway along one of the sides open up your bias tape and place the right side down onto the fabric. Move your needle over leave a 1" tail before beginning to sew.
Step 4: Sew around when coming near to the tail of fabric that was left fold the front piece of fabric, and place the end on top as pictured.
Step 5: Fold the bias tape along the backside, and sew around securing the bias tape down.
Step 6: When coming to the end ensure the is tucked under and back stitch ontop to secure.
..quick and easy! Iron and use!